Build a backup or off-grid charging setup with both solar and wind equipment in one package. The Nature's Generator L3600 combines a listed 3600W pure sine wave output with a 3072Wh LiFePO4 battery. Choose from three bundles with different solar panel quantities and ratings, including an option with a Power Pod for battery expansion. Each selection lists a 150W wind turbine for supplemental charging when wind conditions allow.
Why Customers Choose This Product
Product Highlights
Two Renewable Charging Sources
Position the panels for available sunlight and use the turbine at a suitable wind-exposed site. Wind charging may be available outside daylight hours, but neither overnight generation nor continuous charging is guaranteed.
Power for Compatible Loads
The L3600 lists 3600W pure sine wave output for compatible appliances, tools, and devices. Check running demand, startup demand, outlet specifications, and the desired operating time before connecting equipment.
Stored Energy with an Expansion Option
The base L3600 battery is listed at 3072Wh. The largest selectable bundle adds a Power Pod; confirm that Pod's supplied model, capacity, and the package's total usable energy before purchase.
Compare Panel Packages
The available solar selections total 200W, 880W, or 1760W of combined panel nameplate capacity. These totals are equipment ratings rather than guaranteed charging rates, and the array must meet the receiving system's electrical limits.
Charging and Status Features
The product information lists solar, wind, and AC charging support, plus an LED status display and BMS. A listed 10ms UPS switchover is subject to operating conditions and device compatibility, not a guarantee of uninterrupted operation for every load.
Specifications
- Brand
- Nature's Generator
- Power station
- L3600 / Lithium 3600
- Listed output
- 3600W, pure sine wave; confirm continuous, surge, and outlet-specific limits
- Listed base battery capacity
- 3072Wh
- Base battery chemistry
- LiFePO4, lithium iron phosphate
- Wind turbine in each selection
- 150W listed rating; actual generation depends on wind and installation conditions
- Charging capabilities referenced in source listing
- Up to 2400W solar, 150W wind, and 1800W AC; confirm applicable configuration and input limits
- Listed UPS switchover
- 10ms, subject to operating conditions and equipment compatibility
- Monitoring
- LED system-status display and BMS
| Power equipment | Solar panels | Combined panel nameplate capacity | Wind turbine |
|---|---|---|---|
| L3600 | 2 × 100W rigid panels | 200W | 150W |
| L3600 | 2 × 440W rigid bifacial panels | 880W | 150W |
| L3600 + Power Pod | 4 × 440W rigid bifacial panels | 1760W | 150W |
The listed 2400W solar capability does not mean that each bundle includes 2400W of panels. Confirm whether that charging limit applies to the station alone or an expanded configuration. Also confirm supplied cables, controllers, mounting equipment, turbine pole, Power Pod specifications, dimensions, weights, operating temperatures, and warranty before ordering.
Ideal For
- Backup plans for selected compatible appliances and devices.
- Off-grid projects with suitable sunlight and wind exposure.
- RV or recreational setups with verified electrical and installation requirements.
- Buyers comparing panel capacity and an optional battery expansion package.
Important Information
- Choose the exact bundle before ordering. A Power Pod is named only in the four-panel selection; a transfer switch is not named in any selection.
- Confirm panel wiring, voltage and current limits, connector compatibility, controller allocation, and approved expansion hardware before installation. Panel wattage alone does not establish compatibility.
- Have a qualified installer assess fixed panel mounting, turbine mounting, grounding, clearances, and any building-circuit connection. Never backfeed a household wall outlet.
- Keep people and pets clear of rotating turbine blades. Follow manufacturer shutdown procedures before maintenance and confirm wind operating limits and severe-weather instructions.
- Whole-home operation is not established by the 3600W rating. Match running and startup demand to the complete system's confirmed limits.
- Battery capacity in Wh is not output power in W or a guaranteed runtime. Additional storage does not by itself increase inverter output.
- Solar and wind ratings are not guaranteed generation rates. Actual charging varies with site conditions, weather, installation, and system limits.
- The listed UPS function does not establish automatic transfer of household circuits, compatibility with all devices, or suitability for life-support equipment.
- Use the power station within manufacturer ventilation, temperature, moisture, and storage requirements. No weatherproof rating or zero-noise operation is claimed here.
- The source listing references UL 2743 certification. Obtain current documentation identifying the exact supplied model before relying on that claim; certification is not independently verified here.
Frequently Asked Questions
What is included in the selectable bundles?
Each selection names an L3600 and a 150W wind turbine. Solar options are two 100W rigid panels, two 440W rigid bifacial panels, or four 440W rigid bifacial panels. Only the four-panel selection also names a Power Pod. Confirm supplied cables, controllers, and mounting equipment before ordering.
How much battery capacity does the system have?
The L3600 base battery is listed at 3072Wh. The four-panel bundle adds a Power Pod, but its supplied model, capacity, and the package's total usable energy should be confirmed before purchase.
Can the turbine charge the system at night?
Wind charging does not require sunlight and may be available at night when conditions are suitable. The 150W turbine rating is not a guarantee of continuous output or overnight charging.
Does every bundle include 2400W of solar panels?
No. The selectable panel packages total 200W, 880W, or 1760W of nameplate capacity. The source listing's up-to-2400W solar figure describes a charging capability that requires configuration and input-limit confirmation, not included panel wattage.
Can it connect to home circuits?
The product information describes compatible transfer-switch use. Have a qualified electrician assess the selected circuits and install appropriate connection equipment. A transfer switch is not named in these bundles, and the listed UPS function does not establish automatic household-circuit transfer.
Choose the solar package that suits your available space and charging plan, then confirm loads, battery contents, and mounting equipment. Plan installation before ordering to make the most of both charging sources.
