Add a wind-powered charging option to your compatible Nature's Generator setup with this 350W wind turbine. Supplied with a controller box and 100-foot wind-rated cable, it offers a way to supplement other charging sources when site conditions allow. Its listed output reaches up to 350W at approximately 27 mph wind speed, not a constant charging rate.
Why Customers Choose This Product
Product Highlights
Another Charging Source for Your Setup
At a suitable site, wind can provide charging input outside daylight hours as well as during the day. Production depends on actual wind conditions, installation, and the connected system; it is not guaranteed overnight or during cloudy weather.
A Rating with Wind Conditions Attached
The listing specifies up to 350W at approximately 27 mph wind speed. Assess the wind available at your proposed mounting location rather than using the rated output as an estimate of continuous production.
Controller and Cable Supplied
The package lists a controller box, 100 feet of wind-rated cable, hub, and hardware. Some assembly is required, and a mounting pole is not included.
Materials for Outdoor Installation
The turbine is described with a powder-coated cast aluminum alloy body and fiberglass nylon blades. Follow the manufacturer's placement and weather-exposure limits; no specific ingress-protection rating is stated here.
Listed Electrical Protection Features
The product information lists over-voltage, over-current, and reverse-charging protection, plus a resettable fuse. These features do not replace correct mounting, wiring, inspection, or manufacturer operating instructions.
Specifications
- Brand
- Nature's Generator
- Product type
- Wind turbine charging accessory
- Listed output
- Up to 350W at approximately 27 mph wind speed
- Body material
- Cast aluminum alloy with powder coating
- Blade material
- Fiberglass nylon
- Included components listed
- Controller box, 100-foot wind-rated cable, hub, and hardware
- Mounting pole
- Not included
- Assembly
- Some assembly required
- Listed protections
- Over-voltage, over-current, reverse-charging protection, and resettable fuse
- SKU
- NGPHWT
| System | Listed compatibility |
|---|---|
| MyGrid 10K Gen 1 | Compatible |
| MyGrid 10K Gen 2 | Compatible |
| Powerhouse 7200 Gen 1 | Compatible |
| Powerhouse 7200 Gen 2 | Compatible |
Confirm your exact system model, controller version, connectors, and required installation accessories before ordering. Compatibility with other Nature's Generator models or third-party systems is not established by this chart. Confirm turbine dimensions, installed weight, mounting specifications, cut-in speed, maximum operating wind speed, and warranty with the manufacturer.
Ideal For
- Owners of the compatible MyGrid and Powerhouse models listed above.
- Sites with suitable wind exposure and space for an approved mounting setup.
- Backup or off-grid charging plans that use wind as a supplemental source.
- Buyers prepared to arrange a mounting pole and complete installation assessment.
Important Information
- This is a charging accessory, not a battery storage system or standalone household AC power supply. A compatible receiving system is required.
- The mounting pole is not included. Confirm pole, foundation, mounting hardware, clearances, and any additional equipment required for your site before purchase.
- Have a qualified installer assess structural support, wind exposure, electrical connections, grounding, and installation requirements. Check applicable local siting requirements before mounting.
- Keep people, pets, and obstructions clear of rotating blades. Follow the manufacturer's shutdown and isolation procedure before maintenance or handling.
- Use the specified controller and approved connections. Do not assume the turbine can connect directly to an arbitrary battery, solar input, or household circuit.
- Actual output varies with wind speed, turbulence, mounting location, controller behavior, and receiving-system limits. The 350W rating is not a guaranteed continuous output or daily energy yield.
- Wind availability does not guarantee the battery will remain charged or that connected appliances will run for a particular duration.
- Follow manufacturer instructions for weather limits, severe-wind procedures, inspections, wiring, and maintenance. Do not infer a storm-survival rating from the outdoor materials.
Frequently Asked Questions
Does the turbine produce 350W all the time?
No. The listed output is up to 350W at approximately 27 mph wind speed. Actual output depends on wind conditions, siting, installation, and the connected system.
Which systems are listed as compatible?
The existing product information lists MyGrid 10K Gen 1, MyGrid 10K Gen 2, Powerhouse 7200 Gen 1, and Powerhouse 7200 Gen 2. Confirm your exact model, controller, and connection requirements before purchase.
What is included, and is a mounting pole supplied?
The listed components include a controller box, 100-foot wind-rated cable, hub, and hardware. Some assembly is required. A mounting pole is not included.
Can it charge at night?
Wind charging does not require sunlight, so charging may be available at night when wind and system conditions are suitable. Overnight charging or a specific energy yield is not guaranteed.
Can it power appliances directly?
This turbine is listed as a charging accessory for compatible Nature's Generator systems, not a standalone household AC supply. Use the specified controller and approved receiving-system connections.
Add wind to your charging plan after confirming your system compatibility and site conditions. Arrange the mounting pole and installation equipment before ordering so the complete setup suits your location.
